home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1996 September
/
CHIP 1996 szeptember (CD07).zip
/
CHIP_CD07.ISO
/
drivers
/
asus
/
ss5i0301
/
read.me
< prev
next >
Wrap
Text File
|
1995-08-18
|
4KB
|
79 lines
1. Updating your system BIOS by PFLASH.EXE
***********************************************************************
* *
* Warning ! *
* ============= *
* *
* 1. Flash EPROM provides you a convenient way to update your *
* system BIOS, please note that updating your system BIOS *
* is serious, only update when you need to do it. Un-necessary *
* updating cause malfunction of the system are not cover *
* within the warranty. *
* *
* 2. If you write something wrong to your FLASH EPROM, system *
* may not boot anymore, please refer to the manual carefully *
* to make sure you follow the correct step in updating, or *
* ask qualify technician and/or call your dealer for help. *
* *
* *
***********************************************************************
(1) Make sure the FLASH Read/Write jumper of M/B is correct. If the
setting is incorrect, the Flash EPROM won't be programed. Please
refer to the manual to set it respectfully.
(2) Boot your system from MS-DOS system diskette which contains no
CONFIG.SYS and AUTOEXEC.BAT files.
Note: FLASH.EXE can't work under protected mode/virtual mode.
Memory manager like QEMM386, EMM386, 386MAX should not be
loaded.
(3) Type "PFLASH", then press "ENTER".
(4) To support "Plug&Play" BIOS Programming, you require "Block Mode"
type FLASH EPROM. The PFLASH.EXE can support SST 5 Volt FLASH
EPROM(PH29EE010) and Intel 12Volt Boot Block FLASH EPROM (P28F001
BX-T) only. Do not continue to program FLASH EPROM if the FLASH
type is "UNKNOWN".
(5) If the system boots up from Non-Plug&Play BIOS, please choose
command option 3.(Advanced Feature) and then choose command
option 2.(Update BIOS Including Boot Block and ESCD) to load new
BIOS into FLASH EPROM.
If the system boots up from Plug&Play BIOS, please choose command
option 3.(Advanced Feature) and then choose command option 2.
(Update BIOS Including Boot Block and ESCD) to load new BIOS into
FLASH EPROM.
Otherwise choose command option 2.(Update BIOS Main Block From
File) to load new BIOS and into FLASH EPROM.
There is one BIOS file in this diskette. Please key-in the
correct BIOS file to program Flash EPROM.
\FLASH\SS5IXXXX.AWD ----- for P/I-P55SP4 M/B
P.S. XXXX=BIOS Version Number
(6) If you get any error during flashing EPROM, please go back to
step 5 until successfully flashing it. Otherwise, your system might
not boot anymore.
(7) Press "ESC" key to exit.
(8) Turn OFF power and restart system again.
**************************************************************************
* *
* Warning ! *
* ============= *
* *
* Using incorrect or unauthorized BIOS file might cause entir *
* BIOS including Boot Block be damaged which the system can't *
* be rescued from floppy anymore. *
* *
**************************************************************************